Anden Steam Humidifier – Duct Kit Unit – LC Canister
- Create the perfect growing and drying conditions for your high value plants with the Anden Steam Humidifier.
- The Anden AS35FP is a high-capacity electrode-type humidifier which runs independently of your HVAC system. The humidifier is capable of between 11.5 and 34.6 gallons per day, providing humidity to grow rooms up to 6,200square feet.
- Running on cold water, the Anden AS35FP generates steam by energizing the two electrodes in the steam canister.
- Current flowing in between the electrodes causes the water to boil, creating steam.
- Steam is delivered into the grow/drying room via the Fan Pack.
- The modulating control will vary the Modulating Steam Humidifier’s output based on the difference between the set point and actual RH.
- When the RH set point is reached the humidifier stops producing steam and continues to energize the fan in the fan pack for 2 minutes to push any residual steam out into the grow/drying room.
- The Anden AS35FP has many advanced safety and operational features:
- Internal Control Board: Manages the complete operation of the humidifier. Fills and drains to maintain proper amperage draw, water level and notifies when service is required.
- Back Flow Protection: Air gap in the fill cap prevents pressure built up.
- Water Level Sensor: Manages the water level in the steam canister to prevent overfilling.
- Automatic Drain and Fill Cycle: Unit flushes and fills periodically to maintain the proper conductivity.
- Drain Water Tempering: Unit uses cold inlet water to temper the canister water reducing the drain water temperature below 140°F to protect PVC piping and condensation pumps.
- End-of-Season Drain: After a 72-hour period with no call for humidity the humidifier will drain the water from the canister. Unit will remain in stand-by until next call for humidification.
- Operating Time Monitor: Accumulates actual humidifier run time to activate periodic drain and fill cycles, end-of-season drain function and monitors the life of canister.
- A simple display panel provides the power switch for on/off operation and illuminated LEDs to show fill, drain, steam operations, and diagnostics. Maintenance is a breeze, no cleaning or scrubbing required. Simply remove the factory installed canister and replace.
- The Model AS35FP includes
- The Steam Humidifier
- Fan Pack
- Model 5558 Control
- Model 4028 Drain trap assembly
- 6’ steam hose
- 10’ drain tubing
- The Anden model AS35FP must be installed by a local HVAC professional.